1. Test overview.

This test is an auto-test of the scanner only. It checks for the correct operation of the scanner.

No parameter is saved and the operator intervention is not required. In fact, it is not a test by itself; it only links up all the test units that are listed below :

This test allows to see if the scanner is functioning but it will not show if the scanner is correctly adjusted.

2. Test Conditions.

This test relates to the scanner only
No film carrier is required to execute this test
No films must be inserted in the film carrier for this test
The acceptance of the test is automatic
No parameter is saved

3. Requirements

None.

4. Realisation of the test.

Click on RUN to execute the test. The unit tests listed below will execute the ones after the others.

Results of each unit test will appear in the your window execution window.

5. Acceptance of the test.

Whatever the results of the unit tests, they will all execute automatically. It is to say that at the end of the auto-test, certain tests could be accepted, others rejected.

If all the unit tests are accepted, the auto-testauto test will be accepted. However, if at least one unit test is rejected, the auto-testauto test will be rejected.Please see corresponding assistance for each unit test.Other affected test.

6. Other affected tests.

Please see corresponding help for each unit test.

7. Trouble shooting.

If one of the unit tests fails :Please see corresponding test help.